Integrated circuit and system design for renewable energy inverters

This study proposes that a novel integrated circuit (IC) and system design for renewable energy inverters can harvest renewable energy to power direct current (DC) and alternating current (AC) loads. In addition, an intelligent synthesis and management tool is developed to design the proposed system and to judge the system’s operational maintenance decisions. Finally, a renewable energy inverter’s information is posted to an online system. Users can obtain the proposed system’s information at any time and place. The accurate and superior performance of the proposed IC and system is confirmed by computer simulations and experimental results.     

SIMPLIS环境中开关电源集成电路控制器模型的开发及应用

介绍现代开关电源行业仿真工作的意义和现状,以及专用仿真软件包SIM etrix/SIMPLIS的优点和不足。通过实例给出SIMPLIS环境中集成电路控制芯片的建模过程,并就其中的关键技术予以简单讨论。     

Biotransformation of l‐menthol by twelve isolates of soil‐borne plant pathogenic fungi (Rhizoctonia solani) and classification of fungi

The microbial transformation of l‐menthol ( 1 ) was investigated by using 12 isolates of soil‐borne plant pathogenic fungi, Rhizoctonia solani (AG‐1‐IA Rs24, Joichi‐2, RRG97‐1; AG‐1‐IB TR22, R147, 110.4; AG‐1‐IC F‐1, F‐4, P‐1; AG‐1‐ID RCP‐1, RCP‐3, and RCP‐7) as a biocatalyst. Rhizoctonia solani F‐1, F‐4 and P‐1 showed 89.7–99.9% yields of converted product from 1 , RCP‐1, RCP‐3, and RCP‐7 26.0–26.9% and the other isolates 0.1–12.0%. In the cases of F‐1, F‐4 and P‐1, substrate 1 was converted to (?)‐(1S,3R,4S,6S)‐6‐hydroxymenthol ( 2 ), (?)‐(1S,3R,4S)‐1‐hydroxymenthol ( 3 ) and (+)‐(1S,3R,4R,6S)‐6,8‐dihydroxymenthol ( 4 ), which was a new compound. Substrate 1 was converted to 2 and/or 3 by RRG97‐1, 110.4, RCP‐1, RCP‐3 and RCP‐7. The structures of the metabolic products were elucidated on the basis of their spectral data. In addition, metabolic pathways of the biotransformation of 1 by Rhizoctonia solani are discussed. Finally, from the main component analysis and the differences in the yields of converted product from 1 , the 12 isolates of Rhizoctonia solani were divided into three groups based on an analysis of the metabolites. Copyright © 2003 Society of Chemical Industry     

“锲而不舍 金石可镂”——上海秀派公司2．45GHz有源RFID标签技术的成功之路

上海秀派公司坚持自己的技术长项——2．45GHz有源RFID,充分发扬该种RFID的特长,记者采访该公司时了解到了开发方面的很多细节、成功案例和实施经验。我们不但非常推崇该公司的“锲而不舍”的意志,而且还意识到如果秀派公司的成功经验一旦辐射到中国的RFID行业中,一定会把这项在国外诞生的技术更好地植根于中国的土壤,使之更加适合中国的实用环境。     

光刻版图形处理过程的计算机仿真

采用有限状态机模型来仿真集成电路行业中光刻版图形的处理过程,涵括了层次处理、涨缩处理和反转处理。将不同的处理过程定义为相应的状态,将图形处理要求定义为输入条件触发状态转换。该模型已应用于光刻版数据处理的电子设计自动化软件。     

集成电路生产中废气的污染及治理

介绍集成电路生产中产生各种废气的种类,废气中有害物质浓度及其危害性,并依据工程实践,评述了各类有害废气的各种处理方法。     

一种900-MHz 20-mW CMOS功率放大器的设计

提出了一个工作电压为3V，工作频率900MHZ，输出功率为20mW的高效率CMOS功率放大器。为了达到设计目标，文章采用了一些特殊的方法，包括三级放大结构，级间的调谐匹配和层叠差分结构。     

中国与世界IC产业发展态势

该文对中国与世界IC产业的发展进行了历史回顾，重点阐述了产业现状与发展方向，并对新世纪的前景进行了科学预测。     

微纳级双极晶体管的热耗散研究

对于双极性晶体管,由于自身存在的自加热现象,严重地影响着器件的特性。基于热电流方程、泊松方程及电流密度方程,在二维器件仿真环境下,进行了微纳级小尺寸npn双极性晶体管热现象的器件物理特性分析。重点研究了器件的集电极电流IC与晶格温度T的因变关系。研究结果显示,随着IC的增加,器件的晶格温度逐渐升高,VCE保持在3.0V、VBE达到最大值0.735V时,随器件晶格温度的升高VBE将减小。最后,笔者给出了描述晶体管温变关系的三维曲线。     

深亚微米条件下的多层VLSI／MCM层分配的遗传算法

本文提出了一个深亚微米条件下的多层ＶＬＳＭＣＭ有约束分层层分配的遗传算法。该算法分为两步：首先进行超层分配，使各线网满足Ｃｒｏｓｓｔａｌｋ约束，且超层数目最少；然后进行各超层的通孔最少化二分层。与目前的层分配算法相比，该遗传算法具有目标全面，全局优化能力强等特点，是一种可应用于深亚微米条件下的ＩＣ ＣＡＤ的有效分层方法。